7 Tips to Fix Slow WiFi

there are many Tips to Fix Slow WiFi You can start using it in your home or office and finally enjoy the connectivity you want and need. The thing is, the problem isn’t always with your carrier network, or even with your modem, just a direct ethernet connection check to confirm.

in many circumstances, The reason why your wireless connection is not working is the WiFi routerit’s not that it’s broken, it’s that it has some misconfigurations, layout issues, and hardware tweaks, and sometimes they’re interference in your home that blocks the network signal without you even realizing it.

90% of users use WiFi and don’t know it

The Basics: Rebooting Your Router

This may be a silly and obvious suggestion, but there are many factors behind it that must be considered.from this fact Your router may be out of sync with your network’s DNSdue to a server update or simply due to a data transfer failure.

This means that your router is using the last established network parameters and Conflicts that affect connection performance. When you reboot the router, the network syncs up again and sends the necessary information so that it can be recognized and wirelessly transmitted to the device.

check radio channel

Sometimes it is necessary to check and change the settings of the transmission channel used by the WiFi router.A lot of slowness issues come from A channel is covered by many devices transmitting on the same frequency band

which affects the correct propagation of the wave and weakens in the process.

The problem comes from the root, the configured router (and we usually don’t retune) they go home with automatic channelsso if you’re in a densely populated area, you might have 10 or 12 routers in the same building transmitting on the same channel.

for it, You have to go to the configuration of the router, you can do this directly from the browser, putting a generic address that is almost always “192.168.0.1”. You can also search for the management address of the router brand on the Internet.

In it, you must Go to the “Channels” section and select a high channelit is recommended to choose a channel after 7 to ensure that you will not transmit on the same frequency with other devices.

check connection

Sometimes the reason for slow network speed is due to infiltrators in the network. There’s always that neighbor you lent him internet once because he came to visit, but then he’d rather hang on; those extra connections slow you down.

A glance at the connected devices is enough Find the blacklist option to block network access from devices you don’t know aboutor simply delete them.

If you don’t quite understand what to do, You can change your passcode and put it only on the devices you wantwhich will cause any other connections to be outside the network.

The power adapter is defective

Many people use the same WiFi router day and night, but they don’t realize that it’s an electronic device that never turns off, and the hardware begins to wear out on a regular basis.

The first thing that goes wrong with a WiFi router is the power adapter, because you’re constantly powering the device, and the leads of the cable start to weaken. This can cause the router to not receive the same amount of power it needs over time.

A router that doesn’t get enough power won’t work on the same power As a result, it won’t be transmitting the best possible signal on the network, causing unexpected interruptions, network fluctuations, or simply connection errors when you try to pair your device.

Verify that the router’s power adapter is in good condition.

Software update

A WiFi router is like any other connected device, It receives software updates, but the carrier and manufacturer didn’t tell us, Therefore, many times a router reaches the end of its useful life without an update.

Here are the tricks to increasing network uptime and quality.In the same management site of your router, you will find it in the last option of its menu Software Upgrade Options.

The network will check to see if any drivers are available for update and allow you to do so immediately, just like any other application.

router location

Of course, the most basic is not the first thing we consider. sometimes, WiFi can be slow because it’s in an unprivileged location, The wave tends to rise, and if it’s very low, say near the floor, it will collide with many objects and will get weaker and weaker to the point where it can’t reach at least another room.

In these cases, the ideal solution is to find a way The router is located as high as possible in your area, This will allow the signal to travel freely and stay strong throughout your home or office.

It is recommended that the router be placed at an average height of at least 1.5 meters to overcome obstacles that might affect its performance.

don’t block the network

It looks the same as the previous point, but it’s not. Many times, we place the WiFi router on the table and cover it with books and objects, and even other electronic devices around, will weaken the signal. We have previously given you a complete guide on how to boost your WiFi signal.

When installing the router, avoid placing metal objects or other equipment nearby, and do not block the antenna signal with tall objects. Do not install it inside furniture with doors to avoid signal degradation.

The end of routers is here, and it’s time for a change

If your WiFi is slow, you’ve tried everything we’ve pointed out on this list, and you still can’t improve your network, then the end of it has undoubtedly come. Like any electronic device, routers have a lifespan.That May last 3 to 5 years, some last much shorter.

The main reason we mentioned earlier is that they’re a team that doesn’t restsince they start functioning until they are replaced, they are always on, also, more and more devices are being connected and connected, so your network may be underpowered and require more resources than your router can provide.

In this case you have to replace it and at this point you have to consider several aspects such as Number of connected devices the new drive can supportyou should also see the area it can cover so the signal reaches your whole house, it even checks for security resources and configuration systems.

now you know What to do if your WiFi is slowbut if there is no solution, we have told you the best way to replace it.

What not to do when connected to a public WiFi network