Unclog bathroom and kitchen pipes with these great home tips that are simple, effective and require only ingredients you have at home.
Clogged pipes are a big problem because they can affect the proper functioning of your dishwasher or sink. Water flow is slow and dirt remains on the surface, but with these homemade tips, you can unclog your pipes without any problems.
Tips for unclogging pipes
One of the most commonly used and popular options are manual openers, but they do not always uncover everything that is deeply accumulated, that is, they are suitable for lighter and shallower clogs. So, there is no doubt that these homemade tips will be your best choice.
The best part is that to unclog your pipes you don’t need any chemical products, they are homemade tips that you can easily do using ingredients you already have at home, which is an economical way to solve the problem.
An effective way to clear pipes
If you have a clogged pipe in your sink, shower, or bathtub, this tip will be your lifesaver. All you need is water and bleach. Remember, the water must be boiling for this method to work perfectly.
Chlorine, on the other hand, is great for cleaning and disinfecting different parts of the home, and for pipes, chlorine is essential.
To perform this cleaning tip, you’ll need to add one cup of bleach per five liters of water. Start by pouring in the chlorine and letting it sit for a while. Then pour boiling water and let it sit for about 15 minutes. Just rinse it with water and you’re done!
Another very effective way to unclog home pipes is to use a product that is less aggressive than chlorine but no less effective. In this case, a gentler option that is incredibly effective is to mix hot water, vinegar, and baking soda.
Not only are these ingredients non-polluting, they are also super effective and economical. To do this, you must put half a cup of baking soda into the clogged drain. Then add half a liter of boiling water and let it sit for 5 to 10 minutes. You will see that the debris blocking the pipe will begin to dissolve.
Then, pour in the remaining baking soda and any vinegar in the glass. Cover the drain with a plug and wait approximately 5 minutes. You may see some bubbles and/or foam starting to form, which means the mixture is working.
Finally, pour the remaining hot water into the pipes. If you think you need to repeat the process, do so without any problem.