Range hood is an essential element of the kitchen Also, one of the areas, even though it may not seem that waya. The more dirt accumulates. For example, it’s similar to ovens and racks filled with grease (cleaning tips). However, it’s also an often forgotten part of cleaning, and it doesn’t help that it’s difficult to clean. So, these are the best tips for cleaning your kitchen range hood quickly and easily.
Remove the fat from it
To remove grease from the range hood, It’s best to use a degreaserand cleaning the inside of the device is both necessary and complicated, since it greatly contributes to its proper functioning.
The grease trap must be made of stainless steel to avoid damage to the hood. First, you have to remove the filter and apply a good coat of degreaser to the inside. You then have to let it work for a few minutes and then wipe the area with a cloth or scrubber. The first pass may not come out completely clean, so you’ll have to repeat the process.
Of course, use baking soda
It’s the ultimate multi-purpose tool for cleaning your house, and your range hood is no exception. To clean the inside, this tip is great for removing dirt from the inside of your engine. In this case, you must first heat the baking soda in several pots with water. Once the water begins to boil, turn on the extractor. Once you’ve done this, you have to let the steam rise and get inside the device to clean it. Leave it like this for an hour and when it empties, add water and baking soda. You will see the fat on the bell begin to drop.
After about an hour, turn off the heat, protect them with absorbent paper to avoid grease, and start cleaning the extractors with a cloth. You can also use a brush with a mixture of baking soda and water to clean certain areas, then wipe the cloth again to complete the cleaning.
Don’t forget the filter
To clean the filters you can put them in the dishwasher, but alternatively you can put them in a basin with water and degreaser for a few minutes. Then take it out and wipe off the oil with a cloth. It will become soft, use a toothbrush on the most difficult areas.
It’s clean outside too
To give it its final look, the exterior must be finished. The extractor must be closed first to complete this operation. You should then use a stainless steel-specific cleaner and pour it over the entire surface., be careful in the button area. Let it work for a few seconds, then wipe the cloth in the direction of the cleaner, which will enhance the shine and prevent marks.